All posts under category "Electrical Engineering and Systems Science / Eess.SP"
In this letter, we address the problem of estimating Gaussian noise level from the trained dictionaries in update stage. We first provide rigorous statistical analysis on the eigenvalue distributions of a sample covariance matrix. Then we propose an interval-bounded estimator for noise variance in h
This article reviews some recent promising approaches to make mobile power closer to reality. In contrast with articles commonly published by the microwave community and the communication/signal processing community that separately emphasize RF, circuit and antenna solutions for WPT on one hand and
The 5Gperf project was conducted by Huawei research teams in 2016-17. It was concerned with the acceleration of signal-processing algorithms for a 5G base-station prototype. It improved on already optimized SIMD-parallel CPU algorithms and designed a new software tool for higher programmer productiv
This paper addresses the problem of adaptive codebook (CB) selection for downlink (DL) precoder quantization in channel state information (CSI) reporting. The accuracy of precoder quantization depends on propagation conditions, requiring independent parameter adaptation for each user equipment (UE).
Electroencephalogram, an influential equipment for analyzing humans activities and recognition of seizure attacks can play a crucial role in designing accurate systems which can distinguish ictal seizures from regular brain alertness, since it is the first step towards accomplishing a high accuracy
This paper presents a Failure-Aware Access Point Selection (FAAS) method aimed at improving hardware resilience in cell-free massive MIMO (CF-mMIMO) networks. FAAS selects APs for each user by jointly considering channel strength and the failure probability of each AP. A tunable parameter (αin [0,1]
Over the past decade, most factories across developed parts of the world employ a varying amount of the manufacturing technologies including autonomous robots, RFID (radio frequency identification) technology, NCs (numerically controlled machines), wireless sensor networks embedded with specialized
Three-dimensional (3D) ultrasound promises various medical applications for abdominal, obstetrics, and cardiovascular imaging. However, ultrasound matrix arrays have extremely high element counts limiting their field of view (FOV). This work seeks to demonstrate an increased field-of-view using a re
This work presents the demonstration of lattice filters based on laterally excited bulk acoustic resonators (XBARs). Two filter implementations, namely direct lattice and layout-balanced lattice topologies, are designed and fabricated in periodically poled piezoelectric film (P3F) thin-film lithium
Reconfigurable intelligent surfaces (RISs) offer programmable control of radio propagation for future wireless systems. For configuration, geometry-driven analytical approaches are appealing for their simplicity and real-time operation, but their performance in challenging environments such as indus
Large language models (LLMs) and multimodal models have become powerful general-purpose reasoning systems. However, radio-frequency (RF) signals, which underpin wireless systems, are still not natively supported by these models. Existing LLM-based approaches for telecom focus mainly on text and stru
Integrated sensing and communication (ISAC) has emerged as a pivotal technology for next-generation wireless networks, enabling simultaneous data transmission and environmental sensing. However, existing ISAC systems face fundamental limitations in achieving high-resolution sensing while maintaining
Matrix approximation methods have successfully produced efficient, low-complexity approximate transforms for the discrete cosine transforms and the discrete Fourier transforms. For the DFT case, literature archives approximations operating at small power-of-two blocklenghts, such as {8, 16, 32}, or
This paper investigates whether large-scale GNSS spoofing activity can be inferred from maritime Automatic Identification System (AIS) position reports. A data-processing framework, called SeaSpoofFinder, available here: seaspooffinder.github.io/ais_data, was developed to ingest and post-process glo
Vibration from an erroneous disturbance harms the manufactured components and lowers the output quality of an FDM printer. For moving machinery, vibration analysis and control are crucial. Additive manufacturing is the basis of 3D printing, which utilizes mechanical movement of the extruder to fabri
Additive manufacturing, particularly fused deposition modeling, is transforming modern production by enabling rapid prototyping and complex part fabrication. However, its layer-by-layer process remains vulnerable to faults such as nozzle clogging, filament runout, and layer misalignment, which compr
Hybrid received signal strength (RSS)-angle of arrival (AoA)-based positioning offers low-cost distance estimation and high-resolution angular measurements. Still, it comes at a cost of inherent nonlinearities, geometry-dependent noise, and suboptimal weighting in conventional linear estimators that
Remote and resource-constrained Internet-of-Things (IoT) deployments often lack terrestrial connectivity for task offloading, motivating non-terrestrial networks (NTNs) with onboard multiaccess edge computing (MEC) capabilities. Nevertheless, in the presence of malicious actors, authentication needs
In this letter, we quantify the impact of device limitations on the classification accuracy of an artificial neural network, where the synaptic weights are implemented in a Ferroelectric FET (FeFET) based in-memory processing architecture. We explore a design-space consisting of the resolution of th
According to the physical phenomena of atmospheric channels and wave propagation, performance of wireless communication systems can be optimized by simply adjusting its parameters. This way is more economically favorable than consuming power or using processing techniques. In this paper for the firs
In mobile communication system, due to the limitations of mobile device such as low power supply as well as small size, most of the processing should be done at the Base Station. Using multi-receive structure at the Base Station really helps better recovery of the original signal by combining differ
Driven by the primary requirement of emerging 5G mobile services, the demand for concurrent multipath transfer (CMT) is still prominent. Yet, multipath transport protocols are not widely adopted and TCP-based CMT schemes will still be in dominant position in 5G. However, the performance of TCP flow
A user of Brain Computer Interface (BCI) system must be able to control external computer devices with brain activity. Although the proof-of-concept was given decades ago, the reliable translation of user intent into device control commands is still a major challenge. There are problems associated w
GARR optical network used to be composed of two separate optical network domains on its national infrastructure. With the aim to integrate these two domains and deliver high performance services all over its infrastructure, we implemented the so called alien wavelength technique, thus improving the
Photoacoustic spectral analysis is a novel tool for studying various parameters affecting signals in Photoacoustic microscopy. But only observing frequency components of photoacoustic signals doesn't make enough data for a desirable analysis. Thus a hybrid time-domain and frequency-domain analysis s
This paper focuses on the routing algorithm for the communications between vehicles and places in urban VANET. As one of the basic transportation facilities in an urban setting, buses periodically run along their fixed routes and widely cover city streets. The trajectory of bus lines can be seen as
Pressure-sensitive mats (PSM) have proved to be useful in the estimation of respiratory rates (RR) in adult patients. However, PSM technology has not been extensively applied to derive physiologic parameters in infant and neonatal patients. This research evaluates the applicability of the capacitive
This work presents the design and implementation of a wireless home monitoring and automation system consisting of wireless sensor/actuator nodes, wireless camera, and a home server. The low-cost wireless sensor/actuator node features temperature, light intensity and motion sensors, and actuator dri
Angular dispersion is the effect of a multi-path propagation observed in received signals. An assessment of this phenomenon is particularly important from the viewpoint of emerging fifth generation (5G) communication systems. In these systems, using the beam-forming and massive multiple-input multip
This paper presents an improved tactile sensor using a piezoelectric bimorph able to differentiate soft materials with similar mechanical characteristics. The final aim is to develop intelligent surgical tools for brain tumour resection using integrated sensors in order to improve tissue tumour deli
In this paper, a low complexity time domain semi-blind algorithm is proposed to estimate and track the time varying MIMO OFDM channels. First, the proposed least mean squares (LMS) based algorithm is developed for the training mode and then is extended for the blind mode of the operation by combinin
Neuromorphic computing using spike-based learning has broad prospects in reducing computing power. Memristive neurons composed with two locally active memristors have been used to mimic the dynamical behaviors of biological neurons. In this work, the dynamic operating conditions of NbO2-based memris
In this paper, a Novel Active Disturbance Rejection Control (N-ADRC) strategy is proposed that replaces the Linear Extended state observer (LESO) used in Conventional ADRC (C-ADRC) with a Nested LESO. In the nested LESO, the inner-loop LESO actively estimates and eliminates the generalized disturban
An integrated radar and communications system (IRCS) where a monostatic radar transceiver is employed for target classification while simultaneously used as a communications transmitter is considered. The radar combined propagation-target response (joint response of the radar propagation channel and
A planar DC-blocker suitable for differential mode signaling applications is designed and fabricated. The theory of this component is explained in a new form which utilizes the wave scattering transfer matrix. The proposed interpretation of the transfer matrix is most suitable for series (cascade) e
Many signal processing applications require digital filters with variable frequency characteristics, especially the filters with variable bandwidth. Due to their linear phase and inherent stability, variable bandwidth finite impulse response (FIR) filters are the popular choice in majority of the ap
This paper reviews the current development of artificial intelligence (AI) techniques for the application area of robot communication. The study of the control and operation of multiple robots collaboratively toward a common goal is fast growing. Communication among members of a robot team and even
Multi-static backscatter networks (BNs) are strong candidates for joint communication and localization in the ambient IoT paradigm for 6G. Enabling real-time localization in large-scale multi-static deployments with thousands of devices require highly efficient algorithms for estimating key paramete
The future of transportation is driven by the use of artificial intelligence to improve living and transportation. This paper presents a neural network-based system for driver identification using data collected by a smartphone. This system identifies the driver automatically, reliably and in real-t
Theoretically, full-duplex (FD) communications can double the spectral-efficiency (SE) of a wireless link if the problem of self-interference (SI) is completely eliminated. Recent developments towards SI cancellation techniques have allowed to realize the FD communications on low-power transceivers,
Enter keywords to search articles